Divorex 3211 - municipal wastewater pump with shredder - 0.9kW/230V -400V - HMAKS = 18m

Divorex This is a series of Italian industrial submersible pumps with a built -in device, crushing at the inlet. Like all sewage pumps of the company Rotomec SRL pump, have solid workmanship and high quality materials, and each element was made with truly Italian precision.  

Axial shredder Divorex With four cutting edges, it provides 11,600 cuts per minute, thanks to which it is possible to economically press with long narrow pipelines from even very distant places, e.g. from individual houses or farms or in a hilly area, where normal pumps cannot cope or their use is uncomfortable. 

Parameters:

• Pump power: 0.9 kW
• Power supply: 1 ~ 230 V or 3 ~ 400 V
• 2 polar engine - 2900 rpm.
• Maximum lifting: 18 m
• Maximum capacity: 3.6 l/s - 216 l/min. - ~ 13 m3/h
• Maximum temperature of the liquid: 40 ° C
• Horizontal connection DN32 PN6 - Gumb "
• Protection degree: IP68
• Long cable: 10 m
• Dimensions: 205 mm, h = 385 mm

Advantages:

• Low lifting with low power
• Highly resistant to clogging
• Double mechanical seal in the oil chamber
• Horizontal flange connection for easy installation with a coupling foot
  

Available version:

• MB - 1 ~ 230V - boot can with a capacitor
• Mg - 1 ~ 230 V with a swimmer + boot can with a capacitor
• No marking - 3 ~ 400 V

Construction:

• Cage type asynchronous engine, 2-paddled, cooled surrounding liquid
• Insulation class f
• Engine housing: G20 gray cast iron
• Pump body: G20 gray cast iron
• Pump rotor: G20 gray cast iron
• Aisi 420 steel stainless steel,
• Cast iron legs built into the body
• Electric cable neoprene H07RNF oil resistant,
• Class A2 / AISI 304 screws,
• Mechanical sealing seal: silicon carbide/silicon veglik/nbr
• Upper mechanical seal: silicon carbide/graphite/nbr

Pump on request!