Home » ASPP 1 automation controlling a home pumping station with 1 pump - for 2 floats
EM4IS

ASPP 1 automation controlling a home pumping station with 1 pump - for 2 floats

Only 1 left
£820.00 contains TAX
Supply voltage
Pump power
Equipment version

The right selection of the pump is the basis for its efficiency and durability.

Control of a home pumping station EM4IS ASPP It is the second easiest way to automatically work the pump in the tank, right after the swimmer built directly into the pump.  Unlike this simple type of control, however, ASPP It enables control of the pump operation that does not have a built -in float and allows you to signal the alarm level. That's why our switchgears ASPP have a two -level control:

  1. Stop/Start - levels of switching and switching off pumps carried out on one swimmer due to the low retention in the tank. The size of the retention is regulated by the length of the working part of the swimmer and the level of its hanging.
  2. Alarm - Alarm signaling level with a tank overflow and additional switching on the pump in the event of a STOP/START swimmer failure. In this mode, the pump will work in emergency mode, and the alarm swimmer will take over the functions of the STOP/START swimmer while switching on the alarm.

In manual mode, it is possible to pump the liquid to the level of pump suction, which can cause it to be announced and in the long run overheating and damage.

Alarm It works regardless of the car mode - manual.

Between the auto and manual modes is the "0" position causing all control and notifying functions to be turned off. This is not tantamount to cutting off the power supply, for this the main switch is used!

Wardrobe equipment:

  • Non -flammable polyester housing with cable chokes
  • Main switch
  • Differential-current circuit breaker
  • Adjustable motor switch
  • Control modes: Auto - 0 - Manual
  • Signaling of the level of controls on the panel
  • Three levels: Stop - Start - Alarm
  • Two controls: STOP/START - ALARM
  • Optical-acoustic signaling rooster
  • Key closure: electric and systemic
  • Water and dustproof housing, resistant to weather conditions
  • Cokół to choose from the list:
    • Version without a pedestal,
    • with a dugged plug,
    • or with a plinth for mounting on the tank plate.

The ASPP control wardrobe does not contain swimmers that can be purchased separately. The recommended level of level signaling is ZSP-2.

If you do not find the right control automation, please contact us, we will try to offer you the right solution.

Karta katalogowa