ASPP 1 automation controlling a home pumping station with 1 pump - for 2 floats

Control of a home pumping station EM4IS ASPP is the second easiest way to automatically operate the pump in the tank, after the float built directly into the pump.  However, unlike this simple type of control, ASPP allows you to control the operation of a pump that does not have a built-in float and allows you to signal the alarm level. That's why our switchboards ASPP have two-level control:

1. Stop/Start - Pump switching on and off levels are performed on one float due to low retention in the tank. The amount of retention is regulated by the length of the working part of the float cable and the level of its hanging.
2. Alarm - Level of alarm signaling about tank overflow and additional pump activation in the event of Stop/Start float failure. In this mode, the pump will operate in emergency mode and the alarm float will take over the functions of the Stop/Start float while activating the Alarm.

In manual mode, it is possible to pump the liquid up to the pump's suction level, which may cause it to contain air and, in the long run, overheat and damage it.

Alarm works independently of the Auto - Manual mode.

There is a "0" position between the Auto and Manual modes, which disables all control and notification functions. This does not mean cutting off the power supply, that is what the Main Switch is for!

Wardrobe equipment:

• Flame-retardant polyester housing with cable glands
• Main switch
• Residual current circuit breaker
• Adjustable motor switch
• Control modes: Auto - 0 - Manual
• Signaling the level change with indicator lights on the panel
• Three levels: Stop - Start - Alarm
• Two control floats: Stop/Start - Alarm
• Optical-acoustic signaling beacon
• Key lock: electric and system
• Waterproof and dustproof housing, resistant to weather conditions
• Plinth to choose from the list:
  • version without plinth,
  • with buried plinth,
  • or with a pedestal for mounting on the tank plate.

• Optional: GSM monitoring - alarm messages in the form of SMS
  • Pump failure
  • Alert level
  • No power

The ASPP control cabinet does not include floats, which can be purchased separately. The recommended level signaling set is ZSP-2.

If you have not found the right automatic control, please contact us and we will try to offer you the right solution.

Karta katalogowa