CF 75 m/mg - mobile drainage pump 0.75kW/230V -400V with or without a swimmer

 - The CF series of the Italian manufacturer Rotomec is perfect for pumping clean and dirty water, rainwater or gray sewage. The vertical outlet and the cooling coat ensure adequate cooling and the possibility of pumping to a very low level. For MG models to 7cm, which limits the built -in control swimmer. Models without a built -in float allow water to pump up to the level of suction through inlet grilles. 

The CF series is extremely light and mobile thanks to a solid stainless steel housing and also has a convenient handle for transport in hand. 

Pumps CF 75 They have a large 12 mm flight (for their dimensions and power), which will protect us against accidental sanding or dirt from dirty water.

Parameters:

• Pump power: 0.75 kW
• Power supply: 230 V or 400 V
• Maximum lifting: 14 m
• Maximum capacity: 410 l/min.
• Size of pollution: up to 12 mm
• Maximum temperature of the liquid: 50° C
• G1 vertical connection½"
• Protection degree: IP68
• Long cable: 5 m
• Wmiry: Ø228 mm, h = 375 mm

Advantages:

• Small pump diameter ideal for narrow wells
• Light and comfortable to carry
• Low pumping level (70 mm from a swimmer, 15 mm in manual mode)
• Engine cooling coat
• Built -in thermal protection
• Resistance to dirt from dirty water up to 10 mm

Available versions:

• M - 1 ~ 230 V - 14 kg
• Mg - 1 ~ 230 V with swimmer - 14 kg
• No marking - 3 ~ 400 V - 13 kg

Construction:

• A cage asynchronous engine cooled with pumped liquid
• Insulation class f
• Single -phase power supply with built -in engine protection and built -in capacitor and three -phase power supply with compulsory protection provided by the user.
• Engine housing, cooling coat and aisi 304 stainless steel rotor
• Aisi 303 steel stainless steel,
• Electric cable neoprene h05rnf oil resistant,
• Class A2 / AISI 304 screws,
• Mechanical sealing aluminum oxide/carbon/nbr