Home » KS100 - DN100 coupling foot for Metalchem ​​-Warsaw pumps
Metalchem-Warszawa

KS100 - DN100 coupling foot for Metalchem ​​-Warsaw pumps

Only 2 left
£686.00 contains TAX
Contents of the set

The right selection of the pump is the basis for its efficiency and durability.

KS100 - this is a basic coupling elbow / coupling foot for submersible pumps manufactured by Metalchem-Warszawa S.A.. Thanks to the coupling foot, sewage pumps slide down two pipe guides to the bottom of the pumping station tank, connect to the discharge pipeline and seal under their own weight. Installing the pump in the tank and then removing it from the tank (inspections and service) does not require entering and operating in aggressive sewage or its vapors.

KS100 parameters

  • Full passage through the ball elbow: 100 mm,
  • Outlet connection diameter: 100 mm,
  • Outlet flange: DN100 PN10/16
  • Pump hook: 4 holes according to the Metalchem-Warszawa standard
  • Guide spacing: 220 mm,
  • Guide diameter: 48.3x2 mm,
  • Weight: 30kg.

Advantages of KS100

  • Short construction - saves space in a tight tank,
  • High durability - we can hang pumps up to 11kW on the KS100, e.g. MSV-80-114
  • Universal DN100 flange - can be installed with 4 or 8 holes,
  • Three-point base - the simplest method of installation, even with an uneven bottom of the tank there are no stresses between the anchored supports,
  • Wide guide spacing - the pump does not "dance" when lowering and the guides do not fall off the pins as in the case of some manufacturers,
  • One EPDM gasket between the pump, hitch and coupling foot - perfectly protects against leakage and pressure loss during pump operation,
  • Powder coating - excellent protection of cast iron against aggressive sewage - guarantees many years of durability in industrial sewage,
  • The ZP100 pump hitch is made of ductile cast iron, which has much better strength and elasticity parameters than ordinary gray cast iron, thanks to which it carries heavy loads and does not break upon any impact,
  • The W100 guide bracket made of AISI 304 stainless steel allows easy and quick installation,
  • Rubber sleeves made of sewage-resistant EPDM stiffen the guides and dampen their vibrations, preventing damage and chipping of the mounting anchors from the tank wall.

The KS100 set includes

  1. KS100 coupling foot - 1 pc.
  2. ZP100 pump hook - 1 pc.
  3. UZ100 hitch seal - 1 pc.
  4. Guide support W100 - 1 set.

It is possible to purchase separately: a hook, a seal, a bracket or just rubber sleeves for 48.3x2 guides.