KSM 80/6 - DRY DN80 sewage pump with VORTEX VORTEX rotor 1.5kW/400V - 960 RPM

Efficient 6 polar (low-speed) dry sewage pump KSM80-6 with a Vortex Vortex rotor of the Italian factory Pump Rotomec SRL It is intended for pumping large amounts of sewage containing solid bodies with a slight lift. 

The VORTEX multi -colored rotor with a large free flight guarantees that the pump will not clog even large or long solid fractions such as wet wipes, hyginical sticks, pieces of rags or residues of food from a restaurant kitchen.

Sewage pumps Rotomec KSM 80/6 With the DN80 collar, they have high efficiency with relatively low power. These pumps have a free flight under the rotor as much as 70 mm, providing high efficiency and protecting against clogging the content of faeces and septic tanks.

Parameters:

• Pump power: 1.5 kW
• Power supply: 3 ~ 400 V
• 6 polar engine - 960 rpm.
• Maximum lifting: 5.5-7 m
• Maximum capacity: 22-27 l/s-1320-1620 l/min. - ~ 79.2-97.2m3/h
• Size of pollution: up to 70 mm
• Maximum temperature of the liquid: 60 ° C
• PH: 6-10
• Horizontal connection DN80
• Engine class: F (155 ° C)
• Protection degree: IP55 B5
• Weight: 95 kg

Advantages:

• High low power performance
• Highly resistant to clogging
• Double mechanical seal in the oil chamber
• Horizontal flange connection for easy installation with a coupling foot
• Resistance to pollution up to 70 mm
• Possibility of assembly vertically and in the lecture

Available versions:

1. KSM 80/6-190F2 A2 L2
2. KSM 80/6-219F2 A2 L2
3. KSM 80/6-219F3 A2 L2
   

Construction:

• Cage type asynchronous engine, 6-pole, air-cooled
• Insulation class f
• Engine housing: G25 gray cast iron
• Pump body: G25 gray cast iron
• Pump rotor: G25 gray cast iron
• Aisi 420 steel stainless steel,
• Class A2 / AISI 304 screws,
• Mechanical seal from the engine side: Silicon carbide
• Mechanical seal from the liquid side: Silicon carbide

Pump on request!