QV 80/363 - 3 kW / 50 Hz - raw sewage pump
Couldn't load pickup availability
State-of-the-art four-pole pumps for sewage and treatment plants, with Vortex impeller.
The submersible electric pump QV is characterized by a robust design and a Vortex impeller, which provides very high resistance to clogging thanks to large passages. At the same time, this impeller provides long-term resistance to wear and allows for versatile applications. These advantages compensate for the slightly lower efficiency than in pumps with channel impellers. QV pumps are especially recommended for water containing a large amount of solids and long fibers, dirty water and raw sewage , mixed and raw sludge, septic sludge, process water.
The connection flanges of QV pumps enable installation on coupling feet, which can be purchased as a separate product.
Technical characteristics:
- Maximum lifting Hmax = 11 m,
- Maximum capacity Qmax = 24.5 l/s / 1470 l/min / 88.2 m3/h,
- Vortex rotor,
- Solid parts passage: Ø80 mm,
-
Horizontal connection: DN80 PN10/16 ,
- Rotation speed: n=1450 rpm,
- Maximum water temperature: 40°C,
- pH range: 6-10,
- Maximum sewage density 1.1 kg/dm3,
- Maximum draft 20 m,
-
Power cable 10 m.
- Weight: 66 kg.
Available versions:
- QV 80/363 - 3~400V
- QV 80/363.GX - 3~400 V - AISI 304 stainless steel rotor
Construction:
- Squirrel cage asynchronous motor in a dielectric and antioxidant oil bath
- IP 68 protection class
- Insulation class F
- Single phase power supply with built-in motor protection and built-in capacitor and three phase power supply with mandatory protection provided by the user.
- Engine housing Cast iron GG 25,
- Shaft stainless steel AISI 420,
- Electric cable neoprene H07RN8-F oil resistant,
- A2 / AISI 304 class screws,
- O-ring and nitrile lip seal,
- Two separate mechanical seals in a chamber with ecological oil, the upper ceramic on silicon carbide, the lower silicon carbide on silicon carbide.
- Thermal protection and humidity probe available on request.