TIANA - Stainless steel pump for raw sewage with a free passage of 50 mm
Couldn't load pickup availability
The MSV-50 sewage pump is designed for pumping sanitary and industrial sewage, as well as drainage and rainwater. It is used in sewage installations, sewage treatment plants and pumping stations, as well as all types of drainage.
Free passage of solids up to 50 mm in size under the impeller ensures trouble-free operation with pipelines with cross-sections of DN50, DN65 and larger.
The pump has a temperature limiter in three phases of the motor stator windings and a humidity switch. These elements exclude the possibility of damage to the engine in the event of overload or moisture getting inside.
The engine is sealed on the side of the pump unit with a double mechanical seal in the oil chamber.
Technical characteristics
- Maximum lifting Hmax = 24.5 m,
- Maximum efficiency Qmax = 15 l/s / 900 l/min / 54 m3/h,
- Vortex rotor,
- Solids passage: Ø50 mm,
- Horizontal connection: DN50 PN10 (or other on request),
- Maximum water temperature: 40°C,
- pH range: 6-10,
- Maximum sewage density 1.1 kg/dm3,
- Maximum immersion 10 m,
- Power cable 10 m.
Construction
- Motor: asynchronous squirrel-cage type,
- Degree of protection: IP 68,
- Insulation class: F,
- Built-in thermal protection and humidity sensor,
- Motor and pump casing: Cast iron ŻL200,
- Impeller: Cast iron ŻL250,
- Motor shaft: stainless steel,
- Electric cable: H07RN8 terminated with free terminals,
- Class A2 / AISI 304 screws,
- Seal: double mechanical seal.